Video

1. Locate the button
   The button is on the front of the device, directly under the blue logo.

2. Press the button
   Press the button and hold it for approximately 7 seconds.

3. Wait for LED confirmation
   A triple light blue LED flash indicates that FindMe has been enabled.

4. Release the button
   You can let go of the button as soon as the LED starts flashing; this confirms the enable action.

How to Factory Reset FindMe

1. Locate the button
   The button is on the front of the device, directly under the blue logo.

2. Press the button five times
   Press the button five times in succession.

3. Wait for LED confirmation
   Three purple LED flashes followed by three light blue LED flashes confirm the factory reset.

How to Disable FindMe?

1. Locate the button which can be found at the front of the device under the logo.
2. Triple press the button and then long press on the fourth button press for approximately 10seconds.
3. The disable will be confirmed by a red-green-blue LED flashing.
4. You can let go of the button during the LED flash, this would confirm that the device has been disabled.